Thursday, March 29, 2012
Export format looks different
Export format - restrict list
You can modify your ReportServer/rsreportserver.config file on the server. Find the Render section and comment out any Extension entries you don't want available.
Thanks, Donovan.
|||Thanks. But this solution will be applied to ALL reports. What of separate report?|||Sorry, it is not possible to restrict export formats on a per-report basis.
Thanks, Donovan.
Export format - restrict list
You can modify your ReportServer/rsreportserver.config file on the server. Find the Render section and comment out any Extension entries you don't want available.
Thanks, Donovan.
|||Thanks. But this solution will be applied to ALL reports. What of separate report?|||Sorry, it is not possible to restrict export formats on a per-report basis.
Thanks, Donovan.
Export Failed - The report was not exported
Any help would be greatly appreciated.See if you find answer here
http://support.businessobjects.com/|||We have tried there and done a few of the suggestions but it still has not fixed the problem. I think it may be a problem with the viewer.
Export Excel Report
--
This post is provided 'AS IS' with no warranties, and confers no rights. All
rights reserved. Some assembly required. Batteries not included. Your
mileage may vary. Objects in mirror may be closer than they appear. No user
serviceable parts inside. Opening cover voids warranty. Keep out of reach of
children under 3.
"HELP" <HELP@.discussions.microsoft.com> wrote in message
news:ED751729-27FD-45C2-9696-7192191BF54E@.microsoft.com...
> how I make to export the reports, to the Excel? Without format XML
Export Different Reports
Now I want to export these reports,but i didn't know which report just i used.
Is there a way to know what kind of report now the CRView using?
I know how export like follows
Dim Report as New rptMy
Report.Export
but if is there "Dim Report as new rpt ",
then i can use "Report.Export" whether rpt is rptMy1 or rpt is rptMy2 ?
By the way , I didn't want to use the View Exportbutton .
I want to use menu to do this
Help^_^I ran across the same scenario. Here's what I did:
Dim Report As Object
Select Case ReportType
Case "ReportType1"
Set Report = New CrystalReport1
Case "ReportType2"
Set Report = New CrystalReport2
Case "ReportType3"
Set Report = New CrystalReport3
End Select
Report.Export
By dimming Report as an object, I was able to set it to whatever report I was currently using. Then I only had to call Export once instead of calling it for each report.|||I found a way
Dim Report As CRAXDRT.Report
Set Report = CRViewer91.ReportSource
'Then for every report
Report.Export
It worked^_^
Friday, March 23, 2012
Export CSV headings incorrect
When any of our reports are exported in CSV, the first row contains the
headers. The problem is two-fold. First any hidden columns, while not being
in the data portion of the export, are included in the headers. Second, the
headers are the design time header names (e.g Text4) rather than the printed
headers (e.g. "Student ID").
Does anyone know if this is a known bug? If so, dcan you supply any links to
description/MS listing of it. If not, is there a setting to print the correct
headers?
Thanks
--
KenI haven't done this for awhile but I don't think they are the name of the
header textbox but the name of the field textbox. Change the name of the
field textbox to the name you want it exported as.
Bruce Loehle-Conger
MVP SQL Server Reporting Services
"Ken" <Ken@.discussions.microsoft.com> wrote in message
news:55E41B73-D1DA-4E34-A6A3-B35D87566F3E@.microsoft.com...
> Using SQL 2000, reporting services w/sp2.
> When any of our reports are exported in CSV, the first row contains the
> headers. The problem is two-fold. First any hidden columns, while not
> being
> in the data portion of the export, are included in the headers. Second,
> the
> headers are the design time header names (e.g Text4) rather than the
> printed
> headers (e.g. "Student ID").
> Does anyone know if this is a known bug? If so, dcan you supply any links
> to
> description/MS listing of it. If not, is there a setting to print the
> correct
> headers?
> Thanks
> --
> Ken|||I appreciate you answering, but 2 things. One, I already thought of that
work-around. It won't work in my situation, and I'm not asking for a
work-around. I am trying to find out if this is a known bug and/or is there a
setting (besides NOHEADER) which controls what get output, when the headers
are being output in CSV. If there is no work-around I wnat to be able to tell
my clients it is a known MS bug, and I will write a CSV export to take care
of the problem.
Thanks
--
Ken
"Bruce L-C [MVP]" wrote:
> I haven't done this for awhile but I don't think they are the name of the
> header textbox but the name of the field textbox. Change the name of the
> field textbox to the name you want it exported as.
>
> --
> Bruce Loehle-Conger
> MVP SQL Server Reporting Services
> "Ken" <Ken@.discussions.microsoft.com> wrote in message
> news:55E41B73-D1DA-4E34-A6A3-B35D87566F3E@.microsoft.com...
> > Using SQL 2000, reporting services w/sp2.
> >
> > When any of our reports are exported in CSV, the first row contains the
> > headers. The problem is two-fold. First any hidden columns, while not
> > being
> > in the data portion of the export, are included in the headers. Second,
> > the
> > headers are the design time header names (e.g Text4) rather than the
> > printed
> > headers (e.g. "Student ID").
> >
> > Does anyone know if this is a known bug? If so, dcan you supply any links
> > to
> > description/MS listing of it. If not, is there a setting to print the
> > correct
> > headers?
> >
> > Thanks
> > --
> > Ken
>
>|||You asked two questions. I had an answer for one of them (being incorrectly
labeled) but not the other (preventing output).
As far as preventing a column from being output I don't have an answer for
you.
Preventing a column from outputting is not something I would consider a bug,
more of a feature you would like that isn't there (assuming it isn't there,
I might just not know an answer).
So, I might be wrong but from my perspective I thought I told you how to
have the csv be correctly labeled (i.e. not showing textbox1 etc).
Bruce Loehle-Conger
MVP SQL Server Reporting Services
"Ken" <Ken@.discussions.microsoft.com> wrote in message
news:852387C9-6C14-455E-BFB8-42E301E3A67A@.microsoft.com...
>I appreciate you answering, but 2 things. One, I already thought of that
> work-around. It won't work in my situation, and I'm not asking for a
> work-around. I am trying to find out if this is a known bug and/or is
> there a
> setting (besides NOHEADER) which controls what get output, when the
> headers
> are being output in CSV. If there is no work-around I wnat to be able to
> tell
> my clients it is a known MS bug, and I will write a CSV export to take
> care
> of the problem.
> Thanks
> --
> Ken
>
> "Bruce L-C [MVP]" wrote:
>> I haven't done this for awhile but I don't think they are the name of the
>> header textbox but the name of the field textbox. Change the name of the
>> field textbox to the name you want it exported as.
>>
>> --
>> Bruce Loehle-Conger
>> MVP SQL Server Reporting Services
>> "Ken" <Ken@.discussions.microsoft.com> wrote in message
>> news:55E41B73-D1DA-4E34-A6A3-B35D87566F3E@.microsoft.com...
>> > Using SQL 2000, reporting services w/sp2.
>> >
>> > When any of our reports are exported in CSV, the first row contains the
>> > headers. The problem is two-fold. First any hidden columns, while not
>> > being
>> > in the data portion of the export, are included in the headers. Second,
>> > the
>> > headers are the design time header names (e.g Text4) rather than the
>> > printed
>> > headers (e.g. "Student ID").
>> >
>> > Does anyone know if this is a known bug? If so, dcan you supply any
>> > links
>> > to
>> > description/MS listing of it. If not, is there a setting to print the
>> > correct
>> > headers?
>> >
>> > Thanks
>> > --
>> > Ken
>>
Wednesday, March 21, 2012
Export
Hi! How I can restrict list of export formats for custom reports? E.g. "Production report" requires only XLS and PDF formats in the list. Is it possible?
Sorry! It's subject for Reporting Services forum!
Friday, March 9, 2012
Expect Parameters which was not supplied when hit the preview tab
data returned when I'm on Data Tab. However when I hit the Preview Tab I got
the error said "An error has occured during report processing. Query
execution failed for data set "TheNameOfMyData". Procedure
"MyWebProcedureName" expect parameters "@.Blah_1" which was not supplied".
What was wrong with the errors? Do I have to pass the parameters. If
so...how do I pass the parameters? Help would much appreciate.One of two things has happened. Either you do not have report parameters or
you have report parameters and the query parameters are not mapped to the
report parameter. Usually, but not always, RS creates the report parameter
automatically for you.
In the data tab click on the ..., go to parameters tab. It should like all
your query parameters and what report parameter it maps to. If empty then go
to layout, click somewhere on blank part of the report. go to the menu
report->parameters. You need to have a report parameter per query parameter
(or rather you should have the report parameters you want to map to the
query parameters to be listed). If not there then add them. Then go back to
the data tab, click on the ... and map the query parameters to the report
parameters.
Bruce Loehle-Conger
MVP SQL Server Reporting Services
"MissQti" <MissQti@.discussions.microsoft.com> wrote in message
news:2F93E890-EB2E-4346-A9CF-6A8DA5E49AF3@.microsoft.com...
> I'm creating my reports and connect to the stored procedure. The results
> of
> data returned when I'm on Data Tab. However when I hit the Preview Tab I
> got
> the error said "An error has occured during report processing. Query
> execution failed for data set "TheNameOfMyData". Procedure
> "MyWebProcedureName" expect parameters "@.Blah_1" which was not supplied".
> What was wrong with the errors? Do I have to pass the parameters. If
> so...how do I pass the parameters? Help would much appreciate.|||BIG THANKS to Bruce for the help. It worked when I mapped the report
parameter to query parameters.
"Bruce L-C [MVP]" wrote:
> One of two things has happened. Either you do not have report parameters or
> you have report parameters and the query parameters are not mapped to the
> report parameter. Usually, but not always, RS creates the report parameter
> automatically for you.
> In the data tab click on the ..., go to parameters tab. It should like all
> your query parameters and what report parameter it maps to. If empty then go
> to layout, click somewhere on blank part of the report. go to the menu
> report->parameters. You need to have a report parameter per query parameter
> (or rather you should have the report parameters you want to map to the
> query parameters to be listed). If not there then add them. Then go back to
> the data tab, click on the ... and map the query parameters to the report
> parameters.
>
> --
> Bruce Loehle-Conger
> MVP SQL Server Reporting Services
> "MissQti" <MissQti@.discussions.microsoft.com> wrote in message
> news:2F93E890-EB2E-4346-A9CF-6A8DA5E49AF3@.microsoft.com...
> > I'm creating my reports and connect to the stored procedure. The results
> > of
> > data returned when I'm on Data Tab. However when I hit the Preview Tab I
> > got
> > the error said "An error has occured during report processing. Query
> > execution failed for data set "TheNameOfMyData". Procedure
> > "MyWebProcedureName" expect parameters "@.Blah_1" which was not supplied".
> >
> > What was wrong with the errors? Do I have to pass the parameters. If
> > so...how do I pass the parameters? Help would much appreciate.
>
>
Wednesday, March 7, 2012
Expanding All SubQuery Nodes In Reports
Hi Everybody,
I've got a report that builds out top level data and adds the plus symbol (+) for collapse/expand next to each of the rows for me to display a detail level tied to that record.
The problem is when we do an export or print, it only applies to the top level instead of all of the detailed information.
Is there a way to automatically expand all tree-nodes in a report for these subqueries?
Thanks in advance.
Best Regards,
Justin
Gentle bump... Anybody know how to do this? I just want to be able to expand all child nodes of a record, either automatically or programatically...
Thanks!
|||Hiya,
You can tell the report to always expand, or, as I did, always closed and added a boolean parameter called "Show All" to the report. I gave it a default value of False, and set the initial visiblity property of the group to an expression to "=Parameters!ShowAll.Value = True". all the user has to do is click the check box marked "Show All" and refresh the report
|||Thanks for the info!
I'm digging through the report designer, but I can't find anywhere to 'tell the report to always expand'.
Mind providing me with further insight into this? Specifically, where in the report designer do I set this property?
Thanks again,
Justin
|||Looking at the report, right-click on the group number on the left hand side and choose edit group (or right click in your report and choose select table 1 (or similar if matrix) click on the border of the table or matrix and choose properties. In groups, choose your group/ edit. Under visibility you can see the options for initial visibility.
That is in visual studio - are you using something else?
HTH
|||Thanks again for your quick reply - this forum is a life saver!
I've got the visibility dialog up, but I'm not sure how to change it to 'Expand All'. Currently the Visibility radio button is set to 'Visible'.
Is there an expression, or something else that I should be using to tell it to Expand All child nodes?
Regards,
Justin
|||You need to look at the child group properties. Visibility depending on another item is always on the child node.Expanding All SubQuery Nodes In Reports
Hi Everybody,
I've got a report that builds out top level data and adds the plus symbol (+) for collapse/expand next to each of the rows for me to display a detail level tied to that record.
The problem is when we do an export or print, it only applies to the top level instead of all of the detailed information.
Is there a way to automatically expand all tree-nodes in a report for these subqueries?
Thanks in advance.
Best Regards,
Justin
Gentle bump... Anybody know how to do this? I just want to be able to expand all child nodes of a record, either automatically or programatically...
Thanks!
|||Hiya,
You can tell the report to always expand, or, as I did, always closed and added a boolean parameter called "Show All" to the report. I gave it a default value of False, and set the initial visiblity property of the group to an expression to "=Parameters!ShowAll.Value = True". all the user has to do is click the check box marked "Show All" and refresh the report
|||Thanks for the info!
I'm digging through the report designer, but I can't find anywhere to 'tell the report to always expand'.
Mind providing me with further insight into this? Specifically, where in the report designer do I set this property?
Thanks again,
Justin
|||Looking at the report, right-click on the group number on the left hand side and choose edit group (or right click in your report and choose select table 1 (or similar if matrix) click on the border of the table or matrix and choose properties. In groups, choose your group/ edit. Under visibility you can see the options for initial visibility.
That is in visual studio - are you using something else?
HTH
|||Thanks again for your quick reply - this forum is a life saver!
I've got the visibility dialog up, but I'm not sure how to change it to 'Expand All'. Currently the Visibility radio button is set to 'Visible'.
Is there an expression, or something else that I should be using to tell it to Expand All child nodes?
Regards,
Justin
|||You need to look at the child group properties. Visibility depending on another item is always on the child node.Expanding All SubQuery Nodes In Reports
Hi Everybody,
I've got a report that builds out top level data and adds the plus symbol (+) for collapse/expand next to each of the rows for me to display a detail level tied to that record.
The problem is when we do an export or print, it only applies to the top level instead of all of the detailed information.
Is there a way to automatically expand all tree-nodes in a report for these subqueries?
Thanks in advance.
Best Regards,
Justin
Gentle bump... Anybody know how to do this? I just want to be able to expand all child nodes of a record, either automatically or programatically...
Thanks!
|||Hiya,
You can tell the report to always expand, or, as I did, always closed and added a boolean parameter called "Show All" to the report. I gave it a default value of False, and set the initial visiblity property of the group to an expression to "=Parameters!ShowAll.Value = True". all the user has to do is click the check box marked "Show All" and refresh the report
|||Thanks for the info!
I'm digging through the report designer, but I can't find anywhere to 'tell the report to always expand'.
Mind providing me with further insight into this? Specifically, where in the report designer do I set this property?
Thanks again,
Justin
|||Looking at the report, right-click on the group number on the left hand side and choose edit group (or right click in your report and choose select table 1 (or similar if matrix) click on the border of the table or matrix and choose properties. In groups, choose your group/ edit. Under visibility you can see the options for initial visibility.
That is in visual studio - are you using something else?
HTH
|||Thanks again for your quick reply - this forum is a life saver!
I've got the visibility dialog up, but I'm not sure how to change it to 'Expand All'. Currently the Visibility radio button is set to 'Visible'.
Is there an expression, or something else that I should be using to tell it to Expand All child nodes?
Regards,
Justin
|||You need to look at the child group properties. Visibility depending on another item is always on the child node.Expand/collapse view on Report Viewer
ReportViewer.dll (MS example).
Any tips/help would be greatly appreciated. Thank you.
MarlonActually, after some testing, the expand/collapse works, but only if the web
site and the reports are on the same server. It doesn't work if they are on
different servers.
Still looking for a solution to this issue.
Marlon
"TechnoSpyke" <technospyke@.yahoo.com> wrote in message
news:unhWp$QGFHA.2824@.tk2msftngp13.phx.gbl...
> The expand +/collapse - view does not work on reports viewed using the
> ReportViewer.dll (MS example).
> Any tips/help would be greatly appreciated. Thank you.
> Marlon
>
Expand/Collapse button on Drilldown - Inversed +/- ! Help!
+/- for the expandability features seems to be completed inversed, and I
cannot find a feature to correct it. It's really bizarre as I have virtually
identical reports in other areas that work on the same basis and these are
correct. I am checking the reports piece-by-piece alongside each other for
any difference in properites but cannot so far find any discrepencies.
If anyone has any experience of this, or an idea of what might be causing
the situation, I'd be more grateful. Thanks.Textboxes have a property called InitialToggleState: Collapsed / Expanded
-- Robert
This posting is provided "AS IS" with no warranties, and confers no rights.
"Matt Swift" <MattSwift@.discussions.microsoft.com> wrote in message
news:0323B48C-3DDD-4606-984C-9291E7D7D605@.microsoft.com...
> One of my reports features a table that works with groups. Unfortunately
> the
> +/- for the expandability features seems to be completed inversed, and I
> cannot find a feature to correct it. It's really bizarre as I have
> virtually
> identical reports in other areas that work on the same basis and these are
> correct. I am checking the reports piece-by-piece alongside each other
> for
> any difference in properites but cannot so far find any discrepencies.
> If anyone has any experience of this, or an idea of what might be causing
> the situation, I'd be more grateful. Thanks.
Expand/Collapse all functionality
reports. We would like to know if there is an expand/collapse all
functionality that we can use, to basically expand or collapse all
twisties on click?
Please advice. Thanks in advance.SQL Server 2000 Reporting Services RTM / SP1 does not support
expand/collapse all
It is on the feature wish list.
--
Bruce Johnson [MSFT]
Microsoft SQL Server Reporting Services
This posting is provided "AS IS" with no warranties, and confers no rights.
"bench" <bench_five@.yahoo.com> wrote in message
news:549f50b4.0408260315.599ee265@.posting.google.com...
> We are implementing toggle items (twistie: +) for some rows in our
> reports. We would like to know if there is an expand/collapse all
> functionality that we can use, to basically expand or collapse all
> twisties on click?
> Please advice. Thanks in advance.
Expand/Collapse all buttons in reports
We just wonder if there is an easy way to incorporate "expand all-collapse all" options in the reports we chose to drill down.
Starting with a collapsed report is lovely but as the data get more it may be easier for some to see it all expanded.
Thanking you in advance,
Dimitris, Athens, GreeceThe closest you can get is to add a boolean report parameter and use that parameter in expressions to determine the initial state of all your expand/collapse items.
-- Robert|||
For the hopeful benefit of anyone else trying to get the InitialToggleState property to behave properly when setting it via an expression: From a posting by Chris Hays elsewhere, we learn that "The values aren't the strings 'Collapsed' and 'Expanded', they're True and False (Boolean)."
So, the conditional to set the InitialToggleState property won't look like this (for a String input parameter):
=IIF(Parameters!HideDetails.Value = "Yes", "Collapsed", "Expanded")
Rather, do it this way:
=IIF(Parameters!HideDetails.Value = "Yes", True, False)
Expand/Collapse all buttons in reports
We just wonder if there is an easy way to incorporate "expand all-collapse all" options in the reports we chose to drill down.
Starting with a collapsed report is lovely but as the data get more it may be easier for some to see it all expanded.
Thanking you in advance,
Dimitris, Athens, GreeceThe closest you can get is to add a boolean report parameter and use that parameter in expressions to determine the initial state of all your expand/collapse items.
-- Robert|||
For the hopeful benefit of anyone else trying to get the InitialToggleState property to behave properly when setting it via an expression: From a posting by Chris Hays elsewhere, we learn that "The values aren't the strings 'Collapsed' and 'Expanded', they're True and False (Boolean)."
So, the conditional to set the InitialToggleState property won't look like this (for a String input parameter):
=IIF(Parameters!HideDetails.Value = "Yes", "Collapsed", "Expanded")
Rather, do it this way:
=IIF(Parameters!HideDetails.Value = "Yes", True, False)
Sunday, February 26, 2012
Expand All/Collapse All Toggle
I have implemented all of the suggestions to create an Expand All/Collapse All toggle on a couple of my reports that have Drilldown using a parameter to control it. But, I have an issue with figuring out how to create a link or button on the reports that can be clicked to set the parameter value appropriately? When I render reports in my application I use the RS2005 ReportViewer control in VS2005, but I do not show the parameter bar in the viewer at all and don't want to.
Is there a way to set the value of the parameter within the Body of the report and then cause the report to render again with that new value?
Thanks,
Steve
I figured it out on my own. I just added the textboxes to the report and set the Action on the textbox to link back to itself and change the ExpandAllToggle parameter to the other value.Friday, February 24, 2012
ExecutionLog reports and subscriptions
We have a report that queries the ReportServer and gives us metrics on
each Report and shows a hitcount for each individual report.
here's my question:
If someone sets up a subscription to a report (say running at 8:00 AM
each Monday) - does that 'running of the report' get counted in the
HitCount?
My guess is "Yes" because even if it's a subscription that runs the
report, it's being 'Ran'.
I'll paste the T-SQL we use to pull the data from ReportServer database
SELECT ExecutionLogs.[RowCount], ExecutionLogs.ByteCount,
ExecutionLogs.TimeRendering, ExecutionLogs.TimeProcessing,
ExecutionLogs.TimeDataRetrieval, Users.UserName,
Reports.Name,
ExecutionLogs.TimeRendering +
ExecutionLogs.TimeProcessing + ExecutionLogs.TimeDataRetrieval AS
TotalTime, Reports.ReportID,
ExecutionLogs.TimeStart
FROM Reports INNER JOIN
ExecutionLogs ON Reports.ReportKey = ExecutionLogs.ReportKey INNER JOIN
Users ON ExecutionLogs.UserKey = Users.UserKey
WHERE ExecutionLogs.TimeStart >=@.pDateBegin AND
ExecutionLogs.TimeStart <@.pDateEnd
ORDER BY ExecutionLogs.TimeStart DESCSubscriptions have: ExecutionLog.RequestType = 1, Report manager runs have
ExecutionLog.RequestType = 0.
But, one thing that I have noticed that throws the Execution Log numbers off
is if you run a report in Report Manager that is 3 pages long, every time you
click the next page, that adds another record to the Execution Log.
"Jason" wrote:
> Hi All,
> We have a report that queries the ReportServer and gives us metrics on
> each Report and shows a hitcount for each individual report.
> here's my question:
> If someone sets up a subscription to a report (say running at 8:00 AM
> each Monday) - does that 'running of the report' get counted in the
> HitCount?
> My guess is "Yes" because even if it's a subscription that runs the
> report, it's being 'Ran'.
> I'll paste the T-SQL we use to pull the data from ReportServer database
> SELECT ExecutionLogs.[RowCount], ExecutionLogs.ByteCount,
> ExecutionLogs.TimeRendering, ExecutionLogs.TimeProcessing,
> ExecutionLogs.TimeDataRetrieval, Users.UserName,
> Reports.Name,
> ExecutionLogs.TimeRendering +
> ExecutionLogs.TimeProcessing + ExecutionLogs.TimeDataRetrieval AS
> TotalTime, Reports.ReportID,
> ExecutionLogs.TimeStart
> FROM Reports INNER JOIN
> ExecutionLogs ON Reports.ReportKey => ExecutionLogs.ReportKey INNER JOIN
> Users ON ExecutionLogs.UserKey = Users.UserKey
> WHERE ExecutionLogs.TimeStart >=@.pDateBegin AND
> ExecutionLogs.TimeStart <@.pDateEnd
> ORDER BY ExecutionLogs.TimeStart DESC
>
Execution 'xxxxxx' not found
simple (eliminating the possibility of it being a session timeout problem).
I constantly get an execution not found error as soon as the report starts to
run. It seems to make no difference where I run any report from or if it is
in Sharepoint integrated mode or not.On Sep 10, 1:34 pm, MP <M...@.discussions.microsoft.com> wrote:
> I am having an issue where I can't get any reports to run no matter how
> simple (eliminating the possibility of it being a session timeout problem).
> I constantly get an execution not found error as soon as the report starts to
> run. It seems to make no difference where I run any report from or if it is
> in Sharepoint integrated mode or not.
This link might be helpful.
http://blogs.msdn.com/sharepoint/archive/2007/08/02/microsoft-sql-server-reporting-services-installation-and-configuration-guide-for-sharepoint-integration-mode.aspx
Regards,
Enrique Martinez
Sr. Software Consultant|||Tried everything I could think of and I couldn't track this down. In the end
I think it has something to do with the fact that the WebUsersGroup name is
too long and it replaced it with a id.
The weird thing is when I use a webpart and view the reports that way they
work.
"MP" wrote:
> I am having an issue where I can't get any reports to run no matter how
> simple (eliminating the possibility of it being a session timeout problem).
> I constantly get an execution not found error as soon as the report starts to
> run. It seems to make no difference where I run any report from or if it is
> in Sharepoint integrated mode or not.
>